10 Install Steps - 3 Min Each
We've Been There
Follow these 10 simple steps to put together the pergola your backyard is asking for! Trust us, it's been on Santa's list for some time now.
Our Easy-Install Design
Not everyone has access or experience to building, which is why we designed the unit to be installed with three main tools. Our Post Base is designed for drainage and easy construction. All posts go up at once and then the top gets set.
Designed To Avoid Challenges
More than just looking good. We want your corners to allow for changes or mistakes. While everything could be dialed in perfectly, make one mistake in construction and it all goes wrong. The wider the tolerance, the less irritation.
Pre-Made For No Mistakes
Aligning everything to fit just right is never easy in the trades, which is why we've taken the hard work out of it for you. Our Post/Beam/Gutter Assembly is designed to drop in and be ready for the rest of the frame while keeping everything aligned perfectly.
Simple and Robust Slots
Sure, we could've made some fancy built-in bearings or gearboxes, but what happens when one fails? Instead, our simple slot and cap design allows for your snow to pile up or your wind to blow while also making construction easy and simple.
Our Easy-Install Design
Not everyone has access or experience to building, which is why we designed the unit to be installed with three main tools. Our Post Base is designed for drainage and easy construction. All posts go up at once and then the top gets set.
Designed To Avoid Challenges
More than just looking good. We want your corners to allow for changes or mistakes. While everything could be dialed in perfectly, make one mistake in construction and it all goes wrong. The wider the tolerance, the less irritation.
Pre-Made For No Mistakes
Aligning everything to fit just right is never easy in the trades, which is why we've taken the hard work out of it for you. Our Post/Beam/Gutter Assembly is designed to drop in and be ready for the rest of the frame while keeping everything aligned perfectly.
Simple and Robust Slots
Sure, we could've made some fancy built-in bearings or gearboxes, but what happens when one fails? Instead, our simple slot and cap design allows for your snow to pile up or your wind to blow while also making construction easy and simple.
Why Do Contractors Typically Install These?
Louvered pergolas have not been offered direct to consumer in the same way that we are until now, because these heavy-duty units typically require a year or more of industry knowledge to install them correctly. We've changed that.
Since these structures are made of high-quality aluminum, contractors without experience run the risk of cutting or grinding something incorrectly, making replacement very expensive compared to going to a lumber yard for a new piece of wood. We've eliminated the need for you to cut or grind anything.
One of the important aspects to construction is building your structure square, plumb, and level. We've created our components to force the unit square to itself. The posts are cut the same height, so the walls that need to be level to one another are within the plane of what they are mounted to, and then you're left to plumb up the posts just before anchoring. Easy - peasy.
Our pergola is designed to be easier to install. We label everything just the same, but (aside from the weight) our unit goes together quickly through intuitively designed junction points.
We work with Mr. Handyman's over 400+ franchises thorughout the United States, which allows you to contact them and hire them to help you build our pergola!
6 Hour
Estimated Installation Time
Our Pergola